Possible malfunctions of a forward axis both steering draughts and ways of their elimination
Cause of defect	Way of elimination
Car <withdrawal> aside
Different pressure of air in tyres of forward wheels	To finish pressure in tyres to norm
The big difference in corners of a longitudinal inclination шкворня from the right and left parties	To check up, whether there is no twisting of a beam of a forward suspension bracket or deposits of forward springs, deterioration шкворней and plugs
The big difference in corners of disorder of the left and right wheels	To check up, whether there is no beam or deterioration deflection шкворней and plugs. At detection of curvature a beam to correct
Different inhaling of bearings of naves of forward wheels	To check up and adjust an inhaling of bearings of naves
Непараллельность axes of forward and back bridges	To check up mutual position of axes of forward and back bridges by distance gauging centre to centre wheels from the right and left parties. At difference detection to find the reason and to eliminate
Wagging of forward wheels
Disbalance of wheels with tyres in gathering	To replace or отбалансировать a wheel having the big disbalance
The raised deterioration in hinges of steering draughts	To replace the worn out hinges
The accelerated cross-section deterioration of a protector of the tyre
Wrong size of a convergence of wheels	To check up, whether погнуты cross-section draught or levers of a steering trapeze, and also whether is not present люфтов in hinges of cross-section draught. To correct погнутые details, to replace the worn out hinges. To adjust a convergence of wheels
Non-uniform deterioration of a protector of the tyre
The big disbalance of a wheel with the tyre in gathering	To replace or отбалансировать a wheel
Set of all reasons influencing non-uniform deterioration	To check up correctness of all corners of installation of wheels, their palpation, a condition of hinges of steering draughts and шкворней with plugs
Knocks at movement
Big axial люфт шкворня	To check up a backlash between the top lug of a fist and a beam lug. To finish a backlash to 0,15 mm, no more, installation of an adjusting steel lining. If necessary to replace the persistent bearing
Radial люфт шкворня in plugs	To replace шкворень with plugs
Insufficient inhaling of bearings of naves of forward wheels or destruction of bearings	To adjust an inhaling of bearings. To replace the damaged bearings
Backlashes in conic connections of fingers of steering draughts	To tighten nuts of fastening of fingers