Possible malfunctions of the shock-absorber and ways of their elimination
Cause of defect	Way of elimination
Podtekanie liquids from the shock-absorber
Easing of an inhaling of a nut of the tank	To tighten a nut
Deterioration of an epiploon of a rod	To replace an epiploon
Забоины or risks on a rod, deterioration of a rod to a descent of a layer of chrome	To replace a rod. Absence of the chromeplated layer is checked on rod reddening at wetting by its solution copper купороса
Unsatisfactory work of the shock-absorber (frequent <breakdowns>, a car swing)
Insufficient quantity of a liquid in the shock-absorber	To remove the shock-absorber from the car, to disassemble, replace faulty details and to add a liquid
Insufficient effort at a return course (at a shock-absorber stretching)
Deterioration of the piston plug	To replace the plug
Надиры on the piston or the cylinder	The damaged details to replace
Leaky overlapping перепускного the valve	To disassemble and wash out the shock-absorber. If necessary to replace the valve and its details
Insufficient effort (or <failures>) at a compression course
Leaky overlapping of the valve of compression because of hit of extraneous particles	To wash out shock-absorber details, to fill in a fresh liquid
Knocks and scratches at shock-absorber work
Easing of an inhaling or deterioration of plugs of the top and bottom eyes of shock-absorbers	To tighten the weakened nuts. To replace the damaged plugs
Excessive quantity of a liquid in the shock-absorber	To fill in a liquid in the shock-absorber in strictly certain quantity specified above
Samootvorachivanie nuts of fastening of the valve of return	To tighten a nut