|
|||
GAS a 2705/gazelleГАЗ-2705, ГАЗ-2705 "Kombi"Introduction + 1. Car nameplate data 2. Specifications and characteristics of cars 3. Controls and devices + 4. The engine - 5. Transmission + Coupling + Transmission + Kardannaja transfer - The back bridge Possible malfunctions of the back bridge and ways of their elimination The device of the back bridge Maintenance service of the back bridge Adjustment of the back bridge Removal of the bridge from the car Dismantling of the back bridge Differential dismantling Survey and the control of a technical condition of details of the back bridge Differential assemblage Assemblage of the back bridge Installation of the back bridge on the car + 6. A running gear + 7. A steering + 8. Brake system + 9. An electric equipment + 10. A car body + 11. Car maintenance service + Appendices эвакуатор Ленинский проспект эвакуатор срочно дёшево |
"Gazelle" Gas-2705>> Transmission>> The back bridge>> Installation of the back bridge on the car Bridge installation on the car is necessary for making in a following order:
- To hang out a back part of the car by means of a crane-beam, to get the bridge established on a support under the car, to lower the car on the bridge so that coupling bolts of springs have entered into apertures in spring pillows;
- To establish step-ladders, stabilizer arms, shock-absorbers, to tighten nuts of fastening of step-ladders;
- To establish wheels and to tighten nuts of fastening of wheels;
- To lift the car, to take out supports from under the bridge;
- To establish brake tubes, to connect a hose of brake system and the bottom end of a rack of a regulator of brake forces;
- To attach cables of a drive of a lay brake to the equalizer;
- To attach карданный a shaft to a flange of a leading gear wheel;
- Definitively to tighten nuts of fastening of wheels;
- To pump over brake system.
|
|