"Gazelle" Gas-2705>> Steering>> Steering repair>> Dismantling of the steering mechanism
For dismantling it is necessary to make the following:

Fig. 7.2. The steering mechanism: In — an edge on the top cover; With — risk at a screw end face; 1 — картер; 2 — the screw with a ball nut; 3 — a shaft-sector; 4 — a stopper of a jellied aperture; 5 — adjusting linings; 6 — a nut; 7 — шплинт; 8 — a plug; 9 — a cover; 10 — a wedge; 11 — a sealant of a steering shaft; 12 — карданный a shaft; 13 — a sealing ring; 14 — a lock ring; 15 — an external ring of the bearing of a shaft-sector; 16 — a shaft-sector sealant; 17 — a cover; 18 — сошка; 19 — a lateral cover; 20 — a stopper


- To merge oil from картера a wheel through a jellied stopper 4 (fig. 7.2 see);
- To clamp the steering mechanism in a vice for inflow under a fixing aperture картера and carefully to clear of a dirt all surfaces;
- To take out two stoppers from картера;
- To remove covers 17, 19 and a spongy sealant 16 from a shaft-sector;
- To straighten бородком лунки on bearings 15 shaft-sectors;
- To remove a stripper serially bearings 15 shaft-sectors without blows and warps, having excluded рассыпание rollers.

The prevention
Shift of bearings on other end of a shaft or hashing of rollers of one bearing with rollers of other bearing are inadmissible.

- To remove a shaft-sector 3 and sealing rings 13;
- To turn away bolts of fastening of the top cover картера and to remove the top cover together with linings;
- выпрессовать from the top cover an epiploon, a bearing holder, having removed preliminary sealing ring and linings 5;
- To remove the screw 2 in gathering with a nut;
- выпрессовать the remained external holder of bearings of the screw.

The note
Выпрессовку external holders of the bearing of the screw from картера and the top cover without need not to make.




efabfad0 http://restreal.ru/